how to assign a com port to usb devices each one of the available usb ports of the computer is assigned a unique com port that can be used with com interface terminals. this means that you can use as many usb devices connected to the computer as the number of com ports on the computer. if you need a specific com port for the software, there is no need to change the com port of the computer. simply use a usb interface other than a com port to connect your measuring devices.

cobra v1.52 is a multifunctional communication tool for windows xp, windows vista, and windows 7. program runs on the xp, vista, and windows 7 operating system for windows. the cobra, is a multifunctional communications tool; it can be used as a connection tool, a information communication tool, and a data acquisition tool. for enhanced graphic support, the program can be configured for the windows 8 operating system and it runs in windows 7 or windows 8.

the cobra enhances graphic support by enabling the program to display three-dimensionally the measuring devices, the calibration body of the measuring devices, the calibration pins, and calibration needles. additionally, the cobra allows a user to directly enter or enter parameters into the device. the cobra also allows a user to see the measurement value or the calibration value on the measuring devices, and each value can be marked on the screen.

the software package facilitates easy setup and operation of the configuration for a supplied usb interface. features include, for example, registration of device types and the configuration of the device names and order as required for a particular model. additionally, it is possible to configure every aspect of the communication performance of the usb device, such as the com port to be assigned, the communication speed, the communication protocol, and the log buffer size. in addition to these settings, the operating system’s drivers are installed, and the usb driver for the application program is installed. 81555fee3f

However, there are some products which share the same name with the product models, so we would like to suggest that you define a suitable product name in Mitutoyo Product Name - This is mainly used for the purpose of registration and purchase of the product, and the Product Name should not be more than 10.

The USB ITPAK software ver2.3 can be downloaded from here: 

USB-ITPAK V2.3 helps those manufacturers that have to deal with the data acquisition from a variety of electronic measuring and control devices. The data acquired .

The MITUTOYO ME is a portable COORDINATION MEASUREMENT. For more information on usage and software, visit the web site.

No software necessary for direct connection, just plug it in.

USB-ITPAK V2.0 is required.

USB-ITPAK V2.3 features - Supported measurement devices: Computers/Tablets, USB-Wireless.

Data are loaded to the PC directly from the device via USB cable.

USB - ITPAK V: Interaction between USB-ITPAK. need to modify the TCP connection parameter, and then the. 3 data files are provided.

USB-ITPAK is required on both the device and the PC.

USB - ITPAK V2.2. Direct connection of PLC with USB-ITPAK.

The software's creation will be based on knowledge of the USB-ITPAK's protocol.

USB-ITPAK is specific software designed for direct connection of PLCs to MITUTOYO Measuring.

The USB-ITPAK software requires Windows .

The device needs to be properly set in USB-ITPAK during the following operating procedures:.

The measurement device must have a data output port to the USB-ITPAK software.

USB - ITPAK V2.4 supports design feature of some measuring.

USB - ITPAK V2.4 will be upgraded to Version 2.5,. mitutoyo usb-itpak software download

Any product that is purchased from a company or an authorized distributor will have the original MITUTOYO software.

This is required to protect the copyright of MITUTOYO.

USB-ITPAK V2.1. USB-ITPAK software.

Acquired data is easy to process with the software.

Please enter the